DIY: How To Create a Striped Iron-On Vinyl Tote Bag

February 28, 2019

We’re always trying to come up with different ways for you to make the most of your crafting supplies – and today’s project is one that will help you use every last inch of your iron-on material! These striped vinyl iron-on tote bags just require a Cricut Maker or Cricut Explore Air and a  little bit of know-how, which is exactly why I’m here.

You’ll need:

STEP ONE:

Remove the backing from the Cricut Transfer Tape or the Heat Resistant Transfer Material – whichever you’re using. 

STEP TWO: 

Begin placing the iron-on strips facedown onto the transfer material. Facedown means that the shiny side of the transfer material is facing down onto the sticky side of the transfer material

STEP THREE: 

Now you can cut out a design using your Cricut Maker or Cricut Explore just as you would if this were a full sheet of iron on material. Next you’ll need to weed.

STEP FOUR:

Place the design onto your tote bag. If you are using Cricut Transfer Tape, you’ll want to cover the entire design with a piece of cotton fabric. This will protect from overheating the material as you apply heat with your iron or Easy Press. If you are using  Adhesive Heat Resistant Transfer Material, you can skip this step.

 

STEP FIVE: 

Use an iron or Cricut EasyPress to apply heat to the project. Work slowly and check often to see if the iron on material has started to adhere. Once it’s started to adhere, you can peel back the transfer material and apply more heat to make sure everything sticks securely into place. 

 

 

 

4 thoughts on “How To Create a Striped Iron-On Vinyl Tote Bag”

  1. These look so good! Such a fantastic way to use up scrap pieces of vinyl. Great colour choices, as well 😍

Leave a Reply to Indya | The Small Adventurer Cancel reply

Keep the conversation going! Your email address will not be published.

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.